The Cld210m Differential Cylinder Pressure Tester is a valuable tool for diagnosing engine problems. This manual will guide you through the proper use and maintenance of the tester to ensure accurate and reliable results.
The Cld210m Differential Cylinder Pressure Tester is designed to quickly locate worn and cracked rings, defective intake and exhaust valves, scored and cracked cylinders, leaky head gaskets, and worn and stripped spark plug bushings. This tester is recommended by TCM per Service Bulletin SB03-3 and is suitable for cylinders with a bore of less than 5.00 inches.
Components and Specifications
The Cld210m Differential Cylinder Pressure Tester comes complete with:
- On-off safety valve to eliminate hose pressure when disconnecting from the cylinder
- .060 inch orifice diameter, .250 inch long, and a 60 degree approach angle for cylinders with a 5.00 inch bore and over
- .040 inch diameter orifice for cylinders with a bore of less than 5.00 inches
- 18MM plug adapter
- Hose and spark plug adapter
- Factory calibrated with a letter of certification available upon request
Operating Instructions
To use the Cld210m Differential Cylinder Pressure Tester, follow these steps:
- Connect the tester to the cylinder and turn on the safety valve
- Pump the tester to the recommended pressure
- Take a reading from the gauge and record the results
- Compare the results to the manufacturer’s specifications to determine the cause of any pressure loss
- Repeat the test for each cylinder to ensure accurate results
Troubleshooting
Common issues that can be diagnosed using the Cld210m Differential Cylinder Pressure Tester include:
- Worn and cracked rings
- Defective intake and exhaust valves
- Scored and cracked cylinders
- Leaky head gaskets
- Worn and stripped spark plug bushings
By following the operating instructions and troubleshooting guide, you can quickly and accurately diagnose engine problems using the Cld210m Differential Cylinder Pressure Tester.
Maintenance and Calibration
To ensure the accuracy and reliability of the Cld210m Differential Cylinder Pressure Tester, regular maintenance and calibration are necessary. The tester should be calibrated annually or as recommended by the manufacturer. The gauge and hoses should be inspected regularly for signs of wear and damage, and replaced as necessary.
The Cld210m Differential Cylinder Pressure Tester is a valuable tool for any mechanic or engine technician. By following the manual and troubleshooting guide, you can quickly and accurately diagnose engine problems and ensure the optimal performance of your engine.